International Transactions on Computer Hardware and Electrical Engineering

10.31424/icses.itchee

Editor in Chief: > Dr. Mohammad Mehrani

    ------------------------------------------------------
    Department of Computer Engineering
    Dezful Branch, Islamic Azad University
    Dezful , Iran
    mehrani@iaud.ac.ir
    ------------------------------------------------------

    International Transactions on Computer Hardware and Electrical Engineering (ITCHEE) is a peer-reviewed open-access publication of its kind that aims at reporting the most recent research and developments in the area of computer hardware and electrical engineering. It publishes advanced, innovative and interdisciplinary research involving the theoretical, experimental and practical aspects of the two paradigms and their hybridizations. ITCHEE is committed to timely publication of very high-quality, peer-reviewed, original articles that advance the state-of-the art of all aspects of computer hardware and electrical engineering. Survey papers reviewing the state-of-the-art of timely topics will also be welcomed as well as novel and interesting applications.

• Fast-Review Option
  Using this service, every peer-review round of your submission will be decreased from regular 60 days to the fast one with only 14 days.

  Fast-Review Option

  About 14 days per round of peer-review instead of the regular 60 days

• Manuscript Editorial Service
  
  Using this service, firstly, you do not need to care about ICSES Manuscript Template, and can submit your draft paper in any format. Secondly, we finally format and typeset your manuscript, if you can get a final acceptance. Thirdly, your manuscript can go on-line instantly after geting acceptance decision.

  Manuscript Editorial Service

  Typesetting and formating your manuscript based on the mandantory ICSES Manuscript Template

Topics of interest include but are not limited to:

• Computer Architecture and VLSI
• Digital System and Logic Design
• Robotics and Mechatronics
• Power Electronics
• Embedded Systems
• Signal and System Theory
• Applied Electromagnetics
• Chip Design and Network on Chip
• Sensor Technologies
• Other Aspects of Computer Hardware and Electrical Engineering

For Any Submissions:

The authors should submit their manuscripts to the Editor-in-Chief via the ICSES Manuscript Management System (IMMS). Every submitted manuscript should consist of the following Parts:

Part I: The first page of the submission should be a Cover Letter containing the manuscript Title, Abstract, Keywords, Main Subject, Corresponding and other Authors with their Affiliations, a statement demonstrating that the submitted manuscript is not submitted “Elsewhere at the same time,” and all the Authors agree to this submission. For convenience, you can use the following ICSES-CoverLetter-Template.docx.

Part II: At least 3 up to 5 Highlights and Novelties should be presented in the Second Page using ICSES-Highlights-Template.docx.

Part III: The manuscript body consist of the following:

• Manuscript Title
• Authors (The first Author is automatically considered as Corresponding Author)
• Affiliations
• Abstract (Max. 2048 Characters)
• Keywords (3 up to 7 Keywords - Max. 512 Characters)
• Introduction
• Related Works (In Chronological Order)
• Problem Formulation (Using Mathematics and Some Description)
• Proposed Approach (Using Algorithm in Pseudo-Code, Flowchart, and Some Pictures)
• Experiment Study (The Configuration of Proposed Approach and Others)
• Results Analytics (Using Charts and Diagrams)
• Conclusion
• Acknowledgement, Grants & Supports
• References (IEEE format with DOI address)
• Photo and Short Biography of each Author

Figures, Tables, and Equations:

All the Diagrams, Charts, and Tables should be made using Microsoft Office Tools (such as Word, Visio, Excel, etc.), and all the other Pictures should be in 300dpi resolution. We encourage Authors to use “Colorful” Diagrams, Charts, and Pictures, while the body of Tables may be “Light Grey.” Besides, all the equations should be made using standard tools like Microsoft Word Built-In “Equation Editor,” or “MathType.”

These specifications for Figures, Tables, and Equations are mandatory for any submission so that any violation of them will result in an “Immediate Rejection” in the review process.

Extended Versions From Conferences:

Currently, extended versions of manuscripts previously published in the featured Conferences are welcome; however, the submitted manuscripts should have the following properties:

• At least 40% extra material specially in the Experiments and Results.
• A paragraph in the Introduction Section should explain the differences as well as How, Where and Why these differences have been applied to this new Manuscript.
• The previously published paper in the Conference should exist in the References Section, and be Cited in the aforementioned paragraph.

Reviewing Process:

All the submitted articles should report original, previously unpublished research results, experimental or theoretical, and will be peer-reviewed. Articles submitted to the journal should meet these criteria and must not be under consideration for publication elsewhere.

Publishing papers in the ICSES Transactions is currently free of charge, and we have adopted the SCOPUS and ISI-WoS policy, and go toward indexing in these Academic Databases. Hence, only the high-quality papers have chance to be accepted; however, our strategy is to mature submitted papers fallen within our standards with some rounds of Revising. Today, the first editorial decision and total publishing process last about 3 and 9 months, respectively. However, the accepted papers will be published on-line as soon as with the final decision.

Paper Length and Extra Page Charge:

• Original Full-Length Papers: All the original full-length papers should be 10 pages in two-column style; however, significant submissions ranging from 8 to 14 pages are considered but with a charge for every Extra Page.
• Review Articles: The Review articles should be 14 pages in two-column style; however, significant submissions ranging from 10 to 18 pages are welcome but with a charge for every Extra Page.
• Short Letters: The Short Letters should be 5 pages in two-column style; however, significant submissions ranging from 4 to 7 pages are welcome but with a charge for every Extra Page.
• Conference Papers: The Conference Papers should be 6 pages in two-column style; however, significant submissions ranging from 5 to 8 pages are welcome but with a charge for every Extra Page.
• Special Issues or Book Chapters: Manuscripts for Special Issues or Book Chapters have no restriction in pages; however, they should be in range of 10 up to 14 in order not to subjected Extra Page Charge
• Others: Other kinds of letters and papers have no restriction in pages, and it is up to the journal's Editor-in-Chief.
• Extra Page Charge: The Extra Page Charge is mandatory to be paid with no exception from the first 2019 as the following:
  

  20$

  For each extra or deficient page

  Mandatory to be paid from the first 2019

After Acceptance:

The accepted manuscripts must follow the style of the journal in order to be published. The mandatory journal-template is in the following. Moreover, a copyright form signed by all the authors are needed before the manuscript goes published.

• ICSES-Journal-Template.doc
• ICSES-Journal-Template.pdf
• ICSES-Copyright-Form.pdf

Currently, ORCID is mandatory for all the Authors of the accepted Manuscripts.

Anti-Plagiarism Policy:

We are using Plag©Scan against plagiarism. The maximum acceptable similarity with other published papers is below 15%; however, we strongly suggest that the similarity should be below 10%. All the corresponding authors of accepted papers should check their accepted versions using Plag©Scan, and send us the report in order to publish their papers.

Article Processing Charge:

The Article Processing Charge (APC) for this journal is as follows; however, some Special Issues and Book Projects may have arbitrary APC based on the leading guest-Editor.

0$

Article Processing Charge

Mandatory to be paid only for the accepted papers to be published.

Extra Services for the Authors (Optional):

Currently, ICSES has developed the following key-enabling services to facilitate and speed up the publication process. Selecting these services during the submission obviates the burden of engaging with ICSES Manuscript Template and ensure your submission will be processed as fast as possible.

• Fast-Review Option
  Using this service, every peer-review round of your submission will be decreased from regular 60 days to the fast one with only 14 days.

  Fast-Review Option

  About 14 days per round of peer-review instead of the regular 60 days

• Manuscript Editorial Service
  
  Using this service, firstly, you do not need to care about ICSES Manuscript Template, and can submit your draft paper in any format. Secondly, we finally format and typeset your manuscript, if you can get a final acceptance. Thirdly, your manuscript can go on-line instantly after geting acceptance decision.

  Manuscript Editorial Service

  Typesetting and formating your manuscript based on the mandantory ICSES Manuscript Template

You can follow the ICSES Payment's Instructions to find how much the fees are and how you can pay for them in order to proceed the publication process of your submitted manuscript.

The members of ITCHEE's editorial board are:

• Publisher
  Prof. Hamid Reza Boveiri
  Sama College, IAU, Shoushtar Branch
  Shoushtar, Iran
  itchee@i-cses.com
  Areas of Expertise

  
  Optimization via Meta-heuristics

  Image Processing & Pattern Recognition

  Parallel and Distributed Systems

  
  
• Editor-in-Chief
  Dr. Mohammad Mehrani
  Dezful Branch, Islamic Azad University
  Dezful , Iran
  mehrani@iaud.ac.ir
  Areas of Expertise

  
  Internet of Things

  Energy Efficient Communications

  Wireless Body Sensor Networks (WBSN)

  
  
• Associated Editor
  Mr. Mohsen Badelan Zadeh
  Shahid Chamran University of Ahvaz
  Ahvaz, Iran
  Mohsenbadelan2930@gmail.com
  Areas of Expertise

  
  Computer Science

  
  
• Editor
  Dr. Vikas Maheshwari
  Bharat Institute of Engineering and Technology
  Hyderabad, India
  maheshwarivikas1982@gmail.com
  Areas of Expertise

  
  VLSI-Interconnect Technology

  Analog and Digital Circuit Design

  Semiconductor Device and Technology

  
  
• Editor
  Mr. Joydeep Bhattacharyya
  Intel Corporation
  San Jose, USA
  joydeep.bhattacharyya@intel.com
  Areas of Expertise

  
  ASIC/FPGA

  Image Processing, Medical Imaging, Ultrasound

  Networking

  
  
• Editor
  Dr. Minh Y Nguyen
  Thai Nguyen University of Technology
  Thai Nguyen, Việt Nam
  minhy@tnut.edu.vn
  Areas of Expertise

  
  Power syste operation

  Smart grid

  Distributed generation

  
  
• Editor
  Mr. Malaoui Abdessamad
  University of Sultan Moulay Slimane
  Beni Mellal, Morocco
  a.malaoui@usms.ma
  Areas of Expertise

  
  Electronics

  Embedded Systems

  Computer Engineering

  
  

The ITCHEE is currently indexed in the following academic databases:

• Scholar Google
• Root Indexing
• Academia.edu
• Publons
• ResearchGate
• ResearchBib
• SJ Impact Factor
• Index Copernicus
• I2OR
• ISI
• Cosmos
• DRJI
• CrossRef

Manuscripts In Press (Unedited):

doi.org/10.31424/icses.itchee.inpress

The Vol. 1, No. 1, Dec. 2015 — Contents:

doi.org/10.31424/icses.itchee.2015.v1.n1

The Vol. 2, No. 1, Jun. 2016 — Contents:

doi.org/10.31424/icses.itchee.2016.v2.n1

The Vol. 3, No. 1, Dec. 2017 — Contents:

doi.org/10.31424/icses.itchee.2017.v3.n1

• Artificial Intelligence: Prosthetic Quantum Brain
  Miscellaneous — Pages 1-2
  Vikas Maheshwari

The Vol. 4, No. 1, Mar. 2018 — Contents:

doi.org/10.31424/icses.itchee.2018.v4.n1

• Embedded Electronics Applied in Remote Labs and Practical Works: A technological Revolution in the Future, What Limits and Impacts?
  Miscellaneous — Pages 1-2
  Malaoui Abdessamad

The Vol. 4, No. 2, Jun. 2018 — Contents:

doi.org/10.31424/icses.itchee.2018.v4.n2

• Latest trends in Hardware Verification
  Miscellaneous — Pages 1-2
  Joydeep Bhattacharyya

The Vol. 4, No. 3, Sep. 2018 — Contents:

• Dielectric Resonator based Multifunctional Antennas for Next Generation Communication Devices
  Miscellaneous — Pages 1-2
  Vikas Maheshwari, Govardhanam P Ramacharyulu

The Vol. 4, No. 4, Dec. 2018 — Contents:

• Massive MIMO: A Survey of Benefits and Challenges
  Miscellaneous — Pages 1-4
  Minh Nguyen

The Vol. 5, No. 1, Mar. 2019 — Contents:

• A Design of Sensing Data Collection Circuits for Wireless Sensor Networks Utilizing WiFi Technology
  Short Letter — Pages 1-5
  Minh Nguyen, Hoa Tran, Giang Tran, Truong Hoang Linh

The Vol. 5, No. 2, Jun. 2019 — Contents:

• Modelling and Simulation of New Space Vector PWM Modulated Input Switched Hybrid Nine Level Converter for Three Phase Grid Connected PV Energy Generation Systems
  Review Article — Pages 1-13
  Sathish Kumar S

The Vol. 5, No. 3, Sep. 2019 — Contents:

• Sleeping Schedules for Energy-Efficiency Purpose in Wireless Sensor Network: Benefits and Challenges
  Miscellaneous — Pages 1-4
  Minh Nguyen
• A Probabilistic Algorithm to Evaluate the Influence of Distributed Generation on the Hosted Power System: A Case Study
  Original Paper — Pages 5-12
  Minh Y Nguyen

Special Isuue: Best Papers of IEEE-National Conference on Emerging Trends on Sustainable Technology and Engineering Applications, Jun. 2020 — Contents:

The Vol. 5, No. 4, Dec. 2019 — Contents:

• Control Paradigms for Multi-Cluster Microgrids: Centralized or Decentralized Schemes
  Miscellaneous — Pages 1-3
  Minh Y Nguyen

The Vol. 6, No. 1, Apr. 2020 — Contents:

• A Review on Booth Encoded Multiplier
  Miscellaneous — Pages 1-2
  Mohammad Mehrani

Contact Us

A selection of key points is included in the following; however, you should refer to the aforementioned documents for full details.

Corresponding Author's Duty

By submitting the manuscript to this publication, the corresponding Author verifies that:

1- The manuscript is original, and has not been partially or completely published elsewhere.

2- The manuscript is not under the evaluation elsewhere, since simultaneous submission is prohibited.

3- The consent of all the Authors has already been gained before the submission.

4- The consent of all the Sponsors has already been gained before the submission.

5- The manuscript has not any plagiarism.

6- All the necessary copyrights for the contents have already been acquired by the Authors.

7- All the results in the manuscript are exact and correct, and have not generated or manipulated.

8- Authors should ensure that they have properly acknowledged the work of others, and should also cite publications that have been influential in determining the nature of the reported work.

9- All the fees based on the services the authors use, or charges they faced should be paid and cleared just on time, where unjustifiable neglect or delay of payment causes severe administrative problems for publisher, and is instance of violation in publication ethics.

Conflict of interest

Every person who has a shared beneficiary with you, such as some of your Colleagues, your Friends, your Family, your Professors, your Students, etc., has “Conflict-of-Interest” with you so that:

1- Authors should not select anyone with conflict-of-interest as his/her Potential Reviewer, Editor, etc.

2- Editors and Reviewers should not accept editoring and reviewing of manuscripts that have any conflict-of-interest with one of the Authors or their Affiliations.

Independence and fair play

Editor-in-Chief, Editors, and Reviewers evaluate submitted manuscripts exclusively on the basis of their academic merit (importance, originality, study’s validity, clarity) and its relevance to the journal’s aimss and cope, without regard to the authors’ race, gender, sexual orientation, ethnic origin, citizenship, religious belief, political philosophy, institutional affiliation, policies of governments or any other agencies outside of the journal itself.

Confidentiality and Disclosure

Editors and editorial staff will not disclose any information about a submitted manuscript to anyone other than the corresponding author, reviewers, potential reviewers, other editorial advisers, and the publisher, as appropriate.

Handling of unethical publishing behaviour

In cases of alleged or proven scientific misconduct, fraudulent publication or plagiarism, the publisher, in close collaboration with the editors, will take all appropriate measures to clarify the situation and to amend the article in question. This includes the prompt publication of an erratum, clarification or, in the most severe case, the retraction of the affected work. The publisher, together with the editors, shall take reasonable steps to identify and prevent the publication of papers where research misconduct has occurred, and under no circumstances encourage such misconduct or knowingly allow such misconduct to take place.