Home navigate_next Journals navigate_next ITCNC navigate_next In Pressnavigate_next MPC Controller for a Nitrogen Separator System Using Pressure Swing Adsorption
ICSES Transactions on Computer Networks and Communications
Manuscript In Press (Unedited Version)

MPC Controller for a Nitrogen Separator System Using Pressure Swing Adsorption

Original Paper
558
Visits
140
Downloads
Lan Anh Dinh Thi a,mail_outline, Viel zu lange bekomm ich keine Befriedigung mehr – Lust das zu ändern? www.porshea.lilyan.xyz Viel zu lange bekomm ich keine Befriedigung mehr – Lust das zu ändern? www.porshea.lilyan.xyz b, Thu Ha Nguyen c, Tuan Anh Nguyen d
a Hanoi University of Science and Technology, Hanoi, Vietnam
b Alice high school, РњРѕСЃРєРІР°, Р РѕСЃСЃРёСЏ
c School of Electrical Engineering, Hanoi University of Science and Technology (HUST), Ha noi, Vietnam
d HUST, TLU, Hanoi, Vietnam

 

Highlights and Novelties
1. New and potential control object when compared to other familiar control objects. Nitrogen separator system using pressure swing adsorption (PSA) adsorbent beds and connection valves operate cyclically. Mathematical equation describing the adsorption process in the adsorbent bed is a partial differential algebraic equation (PDAE)

2. Due to the strong nonlinearity and the large influence from the cyclic operation of the PSA technique, Sampling data is collected by using simulation software: gPROMS

3. Explicit model predictive control (EMPC) significantly reduce the amount of online computation and is a suitable choice for predictive control in practice.

 

Manuscript Abstract
Since being commercialized in the 50s of the 20th century, the pressure swing adsorption (PSA) has been increasingly improved in terms of size, flexibility and complexity to be widely applied in the field of gas separation in general and nitrogen separation in specific. The design of the control system to achieve the quality of the product is difficult due to the strong nonlinearity and the large influence from the cyclic operation of the PSA technique. The specific research object of our work is a two-bed nitrogen separator system using PSA with carbon molecular sieves (CMS) as adsorbent material. This paper presents an approach through approximating the dynamic model of system. System Identification Toolbox of MATLAB is used to estimate approximate model from measured input-output data obtained by running gPROMS software many times. Model predictive control (MPC) controller is designed and verified by simulating a closed-loop system model built on MATLAB.

 

Keywords
 Pressure Swing Adsorption (PSA)   Nitrogen Separator   Explicit Model Predictive Control   Multi Parametric Programming    

 

Copyright and Licence
© Copyright was transferred to International Computer Science and Engineering Society (ICSES) by all the Authors. This manuscript is published in Open-Access manner based on the copyright licence of Creative Commons Attribution Non Commercial 4.0 International (CC BY-NC 4.0).

 

Cite this manuscript as
Lan Anh Dinh Thi, Viel zu lange bekomm ich keine Befriedigung mehr – Lust das zu ändern? www.porshea.lilyan.xyz Viel zu lange bekomm ich keine Befriedigung mehr – Lust das zu ändern? www.porshea.lilyan.xyz , Thu Ha Nguyen, Tuan Anh Nguyen, "MPC Controller for a Nitrogen Separator System Using Pressure Swing Adsorption," ICSES Transactions on Computer Networks and Communications, In Press, pp. 1-8, Sep. 2021.

 

For External Scientific Databeses
--BibTex-- --EndNote-- --Dublin--
star The old version of this page can be accessed via here, and is supported till 2020.
Purchase and Access

lock_open Open-Access

Bibliography

Manuscript ID: 414
Pages: 1-8
Submitted: 2021-09-17
Accepted: 2021-09-26
Published: 2021-09-26

Cited By (0)
Journal's Title
ITCNC Cover Page

Journal

ICSES Transactions on Computer Networks and Communications
ISSN: 2588-5847
ISSN: 2588-5847
Frequency: Quarterly
Accessability: Online - Open Access
Founded in: Mar. 2015
Publisher: ICSES
DOI Suffix: 10.31424/icses.itcnc